PIPE FITTINGS/FLANGES +
Seamless, Stainless, Welded Fittings/Flanges
| Tee | Reducer | Eccentric Reducer |
 |
 |
 |
| Cross | Cap | Bend |
 |
 |
 |
 |
 |
 |
TECHNICAL DETAILS FOR EACH FITTINGS:
| Standard Fittings | |||
| Product | Dimensions | Type | Manufacturing Process |
| Elbow | upto 42inch | Seamless and Welded | Hot formed / Cold formed / Mandrel |
| Equal Tee Reducing Tee |
upto 42inch | Seamless and Welded | Hot formed / Cold formed |
| Concentric Reducer Eccentric Reducer |
upto 42inch | Seamless and Welded | Hot formed / Cold formed |
| Caps | upto 42inch | Seamless | Hot formed / Cold formed |
| Special Fittings | |||
| Product | Dimensions | Type | Manufacturing Process |
| Reducing Elbow | upto 42inch | Seamless and Welded | Hot formed / Cold formed / Mandrel |
| Bends Special Radius 2.5D / 3D / 5D |
upto 42inch | Seamless and Welded | Hot formed / Cold formed |
| Barred Tee | upto 42inch | Seamless and Welded | Hot formed / Cold formed |
| Equal and Reducing Crosse | upto 42inch | Seamless and Welded | Hot formed / Cold formed |
| Equal and Reducing Lateral | upto 42inch | Seamless and Welded | Hot formed / Cold formed |
| Standard | Material Specification | Steel Grade | Size Range |
| ASTM A234/A234M | Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service | WPB, WPC, WP5, WP9, WP11, WP12, WP22, WP91, WP92 | OD: 10.3mm ~ 1067mm WT: 1.2mm ~ 120mm |
| ASTM A403 / A403M | Wrought Austenitic Stainless Steel Piping Fittings | WP304/304L, WP304H, WP316/316L, WP316H, WP317/317L, WP321, WP321H, WP347, WP347H, WP310S, WP316Ti | OD: 10.3mm ~ 1067mm WT: 1.2mm ~ 120mm |
| ASTM A815 A815M | Wrought Ferritic, Ferritic/Austenitic and Martensitic Stainless Steel Pipe Fittings | UNS S31803, UNS S32750, UNS S32760, UNS S32205 | OD: 10.3mm ~ 762mm WT: 1.2mm ~ 50mm |
| ASTM B366 / B366M | Factory-Made Wrought Nickel and Nickel Alloy Fittings | UNS N10276(Alloy C276) UNS N08020(Alloy 20) UNS N06625(Alloy 625) UNS N08800(Alloy 800) UNS N08825(Alloy 825) UNS N080904(Alloy 904l) … … |
OD: 10.3mm ~ 406.4mm WT: 1.2mm ~ 30.96mm |
Typical Fittings Manufacturing Process:
- From Pipe:
RM inspection --> Cutting --> Bending/Forming --> Heat Treatment --> Shot Blasting/Pickling --> NDE --> Bevel End --> Visual & Dimension inspection --> Coating --> Marking – Parking...
- From Plate:
Rm inspection --> Cutting --> Forming --> Longitudinal grooving --> Welding --> NDE --> Heat Treatment --> Shot Blasting/Pickling --> Bevel End --> Visual & Dimension inspection --> Coating --> Marking - ->packing...
TECHNICAL DETAILS FOR FLANGES:
